home *** CD-ROM | disk | FTP | other *** search
- Path: cs.vu.nl!sun4nl!xs4all!noblehouse!Ronald
- Newsgroups: comp.sys.amiga.hardware
- From: Ronald@noblehouse.xs4all.nl (Ronald van Eijck)
- Subject: A3000 scsi termination.
- X-NewsSoftware: GRn 2.1 Feb 19, 1994
- MIME-Version: 1.0
- Content-Type: text/plain; charset=iso-8859-1
- Content-Transfer-Encoding: 8bit
- Message-ID: <Ronald.06vr@noblehouse.xs4all.nl>
- Date: Fri, 9 Feb 96 23:22:02 CET
- Organization: R&R Software
-
- Hi,
-
- My A3000 has an internal drive and 2 external units. The last external
- unit is terminated as is the internal drive. The terminators on the
- mainboard are also still there. Since I changed the internal drive it
- sometimes doesn't boot ok. Could this be caused by the tripple
- termination? Is it advisable to remove the mainboard terminators if
- you have both internal & external devices? Would removing the
- terminators from the internal drive also be an option, the cable is
- only 10 cm or so.
-
- C'ya,
-
- --
- * Ronald van Eijck
- *
- * If you know the enemy and know yourself, you need not fear
- * the result of a hundred battles. (Sun Tzu)
-